MAC TOOLS MW250 Instrucciones de operaciones descargar pdf (Pagina 357)

100

101

TM 5-4310-452-14

5-35. AIR COMPRESSOR MAINTENANCE (Con't).

7. Apply a light coat of sealing compound to threads of 4 socket head capscrews (14). Install socket head

capscrews in gear case (4) and retaining plate (17). Tighten socket head capscrews to 18 lb. -ft. (24.40 N•m).

8. Install gear case (4) and new gasket (16) on housing (9) with 10 capscrews (30). Tighten capscrews to 58 lb. -ft.

(78.50 N•m).

9. Install middle part of new shaft seal (13) on shaft (18) and front part of shaft seal in retaining plate (11).

10. Install new preformed packing (12) and retaining ring (10) on retaining plate (11).

11. Install retaining plate (11) on gear case (4) with 4 capscrews (31). Tighten capscrews to 32 lb. -ft. (43 N•m).

12. Install compressor coupling and mounting (see paragraph 5-38).

d. INSTALLATION

1. Install lifting eyebolt (8) in compressor (9). Attach hoist to lifting eyebolt.

2. Using hoist, position compressor (9) in place on engine.

TA505607

5-87

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 404 405

Comentarios a estos manuales

Sin comentarios

MAC TOOLS MW250 Instrucciones de operaciones Pagina 357

Comentarios a estos manuales

Relacionado con productos y manuales para Sistema De Soldadura MAC TOOLS MW250